Instructions for use and maintenance
This manual is owned by GEA Niro Soavi Any reproduction, even partial, is prohibited.
04C100-4C0
GEA Niro Soavi
79
4.6.2 Positioning
Positioning the machine properly on the client's production line allows it operate optimally as well as
ensuring good access for routine maintenance.
For this reason, in relation to its size, you must maintain a free area around the machine for
maintenance, as shown in the figure given below.
In particular, we recommend keeping enough space for replacing the main motor using lifting
equipment (bridge crane or lift truck).
The front end and head need routine maintenance; keep enough free space for completely removing
the head.
It is also good to keep any sources of heat which may affect its cooling away from the machine, and
make sure there are no obstacles to the free flow of air.
You must also provide drainage for the waste water to avoid flooding which may affect the machine,
and make sure no jets of water can enter the machine via its ventilation openings.
CAUTION:
The floor must be rated to support at least 150% of the machine's weight.
The weight is shown on the installation drawing in the enclosed Technical Specifications
Dossier.
FIG. 4.8
Summary of Contents for Niro Soavi One7TS
Page 2: ......
