Instructions for use and maintenance
This manual is owned by GEA Niro Soavi Any reproduction, even partial, is prohibited.
05C100-4C0
GEA Niro Soavi
85
c) Check that the high pressure flanges, fittings and all nuts of the compression head
(3)
are torqued
to the values given in the "Tightening torques" table in Chapter 7 in this manual (sheet 00[C]).
FIG. 5.5
d) Check the tightness of the pumping pistons
(4)
and that the seal packs are present, if they were
removed because the machine was stopped or stored for more than 3 months.
FIG. 5.6
Summary of Contents for Niro Soavi One7TS
Page 2: ......
