Instructions for use and maintenance
This manual is owned by GEA Niro Soavi Any reproduction, even partial, is prohibited.
04C100-4C0
GEA Niro Soavi
80
4.6.3 Levelling the machine
To allow the machine to operate properly without excess vibration, it must be levelled and all feet
must be in good contact with the floor.
The machine features height-adjustable feet.
To level the machine, proceed as follows:
- raise the machine
- adjust its height off the ground by screwing the adjustable feet in/out, using the machined surface
of the head as a level reference;
- make sure that the machine's weight is resting on all the feet;
- lock the feet with the nut
(1)
.
If you wish to prevent vibrations moving the machine and thus stressing the pipes, you can mount
steel rings to the floor to restrain the feet.
FIG. 4.9
Summary of Contents for Niro Soavi One7TS
Page 2: ......
