Instructions for use and maintenance
This manual is owned by GEA Niro Soavi Any reproduction, even partial, is prohibited.
02C100-7C0
GEA Niro Soavi
25
2.2.3 Pressure Gauge
The pressure gauge installed on the machine is a critical component inasmuch as it measures the
machine's operating pressure and hence its operation.
A defective or inoperative pressure gauge means the machine cannot operate at the required
pressure; make sure to keep a spare pressure gauge on hand in case of need.
The type of pressure gauge depends on the model of machine or optional configurations.
The standard pressure gauge is the analogue type with a Bourdon spring, with an aseptic design
diaphragm separator, with specific design and dimensions for
GEA Niro Soavi
; it is also equipped
with a separator with the function of filtering the normal pulsations of the piston machine to allow a
stable reading of the operating pressure.
Never separate the pressure gauge from its separator.
Other versions of pressure gauges or pressure meters are available as an alternative:
• analogue pressure gauge with signal transmitter: equipped with a 4-20 mA output for remote
transmission of the pressure signal
FIRST STAGE HEAD PRESSURE GAUGE
FIG. 2.5
Summary of Contents for Niro Soavi One7TS
Page 2: ......
