Instructions for use and maintenance
This manual is owned by GEA Niro Soavi Any reproduction, even partial, is prohibited.
07C100-7C0
GEA Niro Soavi
146
Assembly
After making the replacement, refit the valve units (making reference to figure 7-21):
- insert the valve seat
(3)
with its gaskets, the ball
(2)
and the cap
(1)
, in sequence for the delivery
assembly. For the suction assembly, mount in succession the cap, ball, seat with gasket and
spacer
(4)
.
- Refit the flanges, tighten the nuts crossways, as shown in Table 001.
Suction valve unit
Delivery valve unit
FIG. 7-21
WARNING:
The nuts on the head must be tightened to the torques indicated in TABLE 00.1 using a torque
wrench (not supplied).
Summary of Contents for Niro Soavi One7TS
Page 2: ......
