Instructions for use and maintenance
This manual is owned by GEA Niro Soavi Any reproduction, even partial, is prohibited.
07C100-7C0
GEA Niro Soavi
138
SHEET A[c]
COMPRESSION HEAD -
Check tightness of pumping pistons and nuts
CAUTION:
Activities to be carried out after maintenance shutdown of the machine (see paragraph 7.3.3)
RESOURCES AND TOOLS
: MAINTENANCE ENGINEER
JOB FREQUENCY
: BEFORE THE INITIAL START-UP + EVERY
200 HOURS + AFTER EACH MAINTENANCE
JOB
TIME REQUIRED
: 20 MINUTES
DESCRIPTION:
To check the tightness of the nuts and pumping pistons, proceed as follows:
- Do the check by tightening the nuts on the compression head with a torque wrench, referring to
the tightening torques stated in TABLE 00.1
- Do the check by tightening the nuts on the piston clamps with the special wrench.
Summary of Contents for Niro Soavi One7TS
Page 2: ......
