GE Vivid 7, Service Manual

Page: 181 / 858

GE H
EALTHCARE
D
IRECTION
FC091194, R
EVISION
11 V
IVID
7 S
ERVICE
M
ANUAL
Chapter 3 - System Setup 3 - 57
3-9-13 Configurable Remote Path User
It is possible to set the User and Password for all remote paths as secondary creditials. These settings
are only used if the log in with the default User and Password fails. If the log in with the default User and
Password succeed, these settings are not used.
Follow these steps to configure the Remote Path User:
1.) Press
Config
(
F2
) and log on as ADM , see 4-2-4 "Log On to the System as ‘ADM’" on page 4-12 .
2.) If not already selected, select
Connectivity
from the bottom row of “buttons” on the screen.
3.) Select the
Tools
tab.
4.) Enter the
Secondary User
and
Password
in the assigned fields.
Figure 3-52 Tools screen
REMOTE PATH
CONFIGURABLE
REMOTE PATH USER