GE Vivid 7, Service Manual

Page: 213 / 858

GE H
EALTHCARE
D
IRECTION
FC091194, R
EVISION
11 V
IVID
7 S
ERVICE
M
ANUAL
Chapter 3 - System Setup 3 - 89
Section 3-10
Connectivity Setup - Software v3.x
NOTE: If connected to a stand-alone network (Peer-to-Peer network with a Vivid 7 scanner, an
EchoPAC PC Workstation and an optional network printer), you should use default delivery
settings.
3-10-1 Introduction
To be able to use the network functions when connected to a hospital network, the scanner must have
a proper network address.
• Before you can set up the scanner, you need to collect some information. The "Pre-quote
Worksheet for DICOM Network Information" on page 2-14 can be used for gathering this
information. Typical source for this information is the network administrator.
• Follow the steps below to prepare the scanner for use on the network.
3-10-2 Contents in this Section
• 3-10-3 "Compatibility" on page 3-89
• 3-10-4 "Select TCP/IP Set-up Screen - Software Version v3.x" on page 3-90
• 3-10-5 "Set the Scanner’s Network Information - Software Version v3.x" on page 3-91
• 3-10-6 "Set the Remote Archive’s Network Information - Software Version v3.x" on page 3-92
• 3-10-7 "Save the New Settings" on page 3-92
• 3-10-8 "Connect to a DICOM Server in a Network - Software Version v3.x" on page 3-93
• 3-10-9 "HL7 Communication Setup - Software v3.x" on page 3-98
• 3-10-10 "Query/Retrieve (Q/R) Setup for Software v3.x" on page 3-102
3-10-3 Compatibility
Vivid 7 with Software Version v3.3.x (System Software v1.5.1) can communicate with:
• EchoPAC PC with software version v3.3.x
• EchoPAC PC with software version v4.x
• EchoPAC PC with software version v5.x
• EchoPAC PC with software version v6.x
• EchoPAC PC with software version v7.x
• Image Vault 3
• Image Vault 4
• EchoServer 7