GE Vivid 7, Service Manual

Page: 135 / 858

GE H
EALTHCARE
D
IRECTION
FC091194, R
EVISION
11 V
IVID
7 S
ERVICE
M
ANUAL
Chapter 3 - System Setup 3 - 11
4.
• Press once on the brake pedal to release the brakes.
• Keep direction lock activated. The direction lock keeps the front wheels from swiveling and blocking the system inside the
narrow transportation box.
Table 3-7 Unpacking Vivid 7 (cont’d)
Step Task
Transport notice FC314187-03
NOTICE
Moving Vivid 7/Logiq 9 in and out of the transportation box
Vivid 7/Logiq 9 has brakes on all wheels, but direction lock only
on the front wheels. The wheels position when moving the
system into its transportation box are therefore vital. If the
wheels are swiveling when the system is inside the
transportation box, it may jam the system inside the box. The
system must be moved backwards both into and out of the
transportation box.
Moving the system into the transportation box
1. Align the front wheel under the front end of the system as
shown in Figure 1.
2. Push the direction lock pedal to lock the front wheels in this
direction. Check that they are locked.
3. Push the Top Console to its lowest and most backward
locked position.
4. Pull the system into the box with the rear end first.
Moving the system out of the transportation box
1. Unlock brakes but keep direction lock activated. The
direction lock keeps the front wheels in position, and secures
the direction stability when the system is rolled out of the
transportation box.
2. Pull the system out of the box with rear end first.
Figure 1: Brakes and direction locks
Figure 2: Console and Wheels position
Front Wheels Rear Wheels
Direction Lock Brake Brakes
IN
OUT
Transportation box
CAUTION
Have two people available to unpack the system.
Attempts to move the system considerable
distances or on an incline by one person could
result in injury or damage or both.