GE Moisture monitor series 3, Programming Manual

Page: 85 / 99

March 2008
4-6 Programming with PanaView
Changing Recorder
Settings
You may also change the settings of a recorder attached to the
MMS-3
: the input type, zero and span values, and how it performs
error handling.
Setting Recorder Values
1.
From the “ New Meter Browser ” option, click on the desired meter
and channel.
2.
From the channel menu, click on the “ Recorders” option, and then
on “ Recorder A” or “ Recorder B .” The Recorder Properties
window appears, as shown in Figure 4-4 below.
3.
To set the recorder type, pull down the “ Type” list box and click
on one of the three choices: 0 to 20 mA, 4 to 20 mA and 0 to 2 V.
4.
To set the recorder unit, pull down the “ Sensor/Class” list box and
click on the desired sensor. Then pull down the “ Unit” list box and
select from the available units.
5.
To establish the input settings, enter the desired values in the
“Zero” and “Span” text boxes.
6.
Click on
[Apply]
to apply the changes immediately, and on
[OK]
to
confirm the changes and close the window.To return the window
to its previous settings, click on the
[Cancel]
button.
Figure 4-4: Recorder Properties Window