Advanced Programming
3-7
March 2008
Setting Up the
Communications Port
(cont.)
If you selected
FORMAT:
Refer to page 3-23 for a sample output and description of report data.
If you selected
PRINTER:
Note:
Enter 0 (zero) as the interval to print at the unit’s update rate.
If you selected
PANALINK:
Note:
If you selected
MODBUS
, refer to
Setting Up MODBUS
Communications
on page 3-8.
You may now do one of the following:
•
Refer to another section and perform a different procedure. Refer
to Figure 3-2 on page 3-48 and Figure 3-3 on page 3-49 to navigate
through the user program.
•
Exit by pressing the
[RUN]
key.
Format Menu
Use the arrow keys to select the
desired report format (
PRINTER,
PANALINK
or
MODBUS
) and
press
[YES]
.
[PRINTER]
`
PANALINK MODBUS
Enter Interval 1
Enter the interval (0 to 90
minutes) at which you want the
MMS-3
to transmit data and
press
[YES]
.
90:00 (MM:SS.)
Enter Node ID 1
Unless you are instructed to
change the Node ID number by
the factory, please leave the
number at the default ID of
16
.
16
Summary of Contents for Moisture monitor series 3
