GE Moisture monitor series 3 Programming Manual Download Page 22

Page: 22 / 99

March 2008

2-6

Basic Programming

Setting the Backlight

Timer

The

MMS-3

has a backlight timer which is provided with battery-

powered units to preserve battery power and prolong the life of the
LCD.

Press the

[PROG]

key to enter the user program.

Note:

If you have already entered the user program, refer to the
menu maps at the end of Chapter 3 to navigate to the
Backlight Menu.

You may now do one of the following:

•

Refer to another section and perform a different procedure. Refer
to the menu maps at the end of Chapter 3 to navigate through the
user program.

•

Exit by pressing the

[RUN]

key.

Enter Passcode: XXXX

Enter the passcode

Programming Menu 1

Use the arrow keys to move the
brackets to

BACKLIGHT

and

press

[YES]

[BACKLIGHT]

Backlight On Time 1

Enter the desired time interval
and press

[YES].

If you do not

want to use the backlight, enter 0
(zero).

00:05 (HH:MM)

Summary of Contents for Moisture monitor series 3




































































































Search results

Summary of Contents for Moisture monitor series 3

Reviews:

Related manuals for Moisture monitor series 3

Brands by name

Popular brands

GE Moisture monitor series 3, Programming Manual

Search results

Summary of Contents for Moisture monitor series 3

Reviews:

Related manuals for Moisture monitor series 3

Brands by name

Popular brands