March 2008
3-16
Advanced Programming
Setting Up the Data
Logger
The
MMS-3
has a data logging feature that enables you to internally
store and view data. Data is logged at user-selected time intervals and
is stored in the unit’s SRAM memory or in an optional PCMCIA card.
You may choose up to twelve (12) parameters to log at a time. Since a
fixed amount of memory is assigned to data logging, the more
parameters you select and the more frequent the time interval, the
sooner the available memory will be filled. The
MMS-3
has a status
screen that lists the number of records, bytes free, bytes used, and the
remaining hours and minutes the log will run before running out of
memory.
Press the
[PROG]
key to enter the user program.
Note:
If you have already entered the user program, see Figure 3-2
on page 3-48 to navigate to the Logger Menu.
You can do one of the following:
•
Indicate how to store logged data, as described in
Storing Logged
Data
on page 3-17.
•
Select measurements you want to log as described in
Setting Up a
Log
on page 3-18.
•
View logged data or the status of the log as described in
Viewing
Logged Data and Status
on page 3-21.
•
Exit by pressing the
[RUN]
key.
Enter Passcode: XXXX
Enter the passcode
.
Programming Menu 1
Use the arrow keys to move the
brackets to
LOGGER
and press
[YES]
.
_
USER [LOGGER]
`
Summary of Contents for Moisture monitor series 3
