March 2008
3-18
Advanced Programming
Setting up a Log
Be sure the number displayed in the upper right-hand corner of the
screen is the channel you want to log. If not, press the
[CHAN]
key to
select the desired channel.
Data Logging 1
Use the arrow keys to select
SETUP
and press
[YES]
.
_
[SETUP] VIEW
Create New Log? 1
Press
[YES]
to create a new log, or
[NO]
to return to the previous
screen.
Press YES or NO
Cyclic: 1
Use the arrow keys to indicate
whether or not you want a cyclic
(circular) log. Press
[YES]
to
confirm your entry.
[NO] YES
Error Log: 1
Use the arrow keys to indicate
whether or not you want to
record errors. Press
[YES]
to
confirm your entry.
[NO] YES
Start: 1
Use the arrow keys to move from
one digit of the starting date and
time to another, and use the
numeric keys to change an entry.
Press
[YES]
to confirm your
entry.
10/03/2000 12:01:14
End: 1
Use the arrow keys to move from
one digit of the end date and time
to another, and use the numeric
keys to change an entry. Press
[YES]
to confirm your entry.
10/03/2000 12:01:14
Interval: 1
Use the numeric keys to enter the
desired log interval in minutes
and seconds (down to 5 sec).
Press
[YES]
to confirm the entry.
00:05
Enter Log#: (1-12) 1
Enter the log item number and
press
[YES]
.
1
Summary of Contents for Moisture monitor series 3
