Programming with PanaView
4-5
March 2008
Changing Alarm Settings
(cont.)
5.
To determine the alarm values, enter the Trip and Deadband
values in the designated text boxes on the window. (For a
definition of the Deadband value, see
Setting Up the Alarms
in
Chapter 3.)
6.
To determine how the alarm will react when it encounters an error:
a.
Pull down the “
High”
list box under the “On Error” line.
b.
Then click on the desired action from the listing: “Ignore
error,” “Trip on error,” “Reset on error,” or “Hold on last
error.”
c.
Repeat the procedure for the “
Low”
list box.
7.
To test the alarm, click on the
[Test]
button. Click on the
[Trip]
button to trip the alarm, and on the
[Reset]
button to reset it.
8.
Click on
[Apply]
to immediately apply the changes, and on
[OK]
to
confirm the changes and close the window. (To return the window
to its previous settings, click on the
[Cancel]
button.)
Summary of Contents for Moisture monitor series 3
