![GE Moisture monitor series 3 Programming Manual Download Page 24](http://html.mh-extra.com/html/ge/moisture-monitor-series-3/moisture-monitor-series-3_programming-manual_126676024.webp)
March 2008
2-8
Basic Programming
Accessing System
Information
If you need to confirm the system information on your particular
MMS-3
unit, the user program includes a menu,
SysInfo
, that supplies
the serial number, run time and boot device for your meter.
Press the
[PROG]
key to enter the user program.
Note:
If you have already entered the user program, refer to the
menu maps at the end of Chapter 3 to navigate to the
SysInfo
Menu.
If you select PROGRAM:
If you select UpTime:
If you select BootDevice:
Enter Passcode: XXXX
Enter the passcode
.
Programming Menu 1
Use the arrow keys to move the
brackets to
SysInfo
and press
[YES].
_
[SysInfo]
System Information
Use the arrow keys to move the
brackets to the desired selection
and press
[YES]
.
[PROGRAM] UpTime
`
Code:MMS3.STD.003C
The program code and
manufacturing date appear,
followed by the serial number
and PCI number. The program
then returns to the
SysInfo
menu.
Mfg. 9/21/00
Up Time; 0 Days
The screen briefly displays the
time the
MMS-3
has run since it
was turned on, and then returns
to the
SysInfo
menu.
5 Hrs 36 Min
Boot device is
The screen briefly displays the
type of boot device installed, and
then returns to the
SysInfo
menu.
Flash
Summary of Contents for Moisture monitor series 3
