Basic Programming
2-7
March 2008
Viewing or Setting the
Clock and Calendar
Use the steps below to view or set the clock and calendar.
Press the
[PROG]
key to enter the user program.
Note:
If you have already entered the user program, refer to the
menu maps at the end of Chapter 3 to navigate to the
CLOCK
Menu.
If you select SHOW
:
If you select SET
:
Use the arrow keys to move the cursor, and then enter the correct
information. The cursor automatically jumps to the next position.
When you are done making changes, press
[YES]
to confirm your
entry. Then press
[NO]
to leave the
CLOCK
Menu and return to the
Programming Menu.
You may now do one of the following:
•
Refer to another section and perform a different procedure. Refer
to the menu maps at the end of Chapter 3 to navigate through the
user program.
•
Exit by pressing the
[RUN]
key.
Enter Passcode: XXXX
Enter the passcode
.
Programming Menu 1
Use the arrow keys to move the
brackets to
CLOCK
and press
[YES]
.
_
BACKLIGHT [CLK]
`
Clock Menu 1
Use the arrow keys to move the
brackets to the desired selection
and press
[YES].
[SHOW] SET
Clock Menu 1
The time and date appear. Press
[YES]
to return to the
Programming Menu.
12:14 06/01/1997
Summary of Contents for Moisture monitor series 3
