GE H48651KR, Service Manual

Page: 354 / 516

GE V
OLUSON
i / V
OLUSON
e
D
IRECTION
KTI106052, R
EVISION
10 S
ERVICE
M
ANUAL
8-12 Section 8-2 - System Software - Installation/Upgrade Procedure
8-2-1-5 System Software - Installation Procedure (FMI from DVD)
(cont’d)
NOTE: If the BT warning dialog ( Figure 8-15 below) appears, enter the Permanent key previously recorded
(refer to Figure 8-2: Option page (e.g., Voluson i) on page 8-5 ) and then click
SUBMIT
.
21.)Remove the System DVD from the DVD/CD+(R)W Drive drive.
22.)
Reconnect the external devices
, install all the printers and adjust the printer settings as described
in Section 3-7 "Printer Installation" on page 3-80 .
23.)Check and match system settings in the
P1-P2-P3
page´s [Print], [Save] and [Export] tab.
24.)Confirm that the date and time are set correctly and that the Windows automatic DST feature is off.
Refer to Section Section 6-10 "Daylight Saving Time (DST) - New Dates" on page 6-12 .
25.)In case that Application software was below SW 7.0.0 (prior to system upgrade), check and match
Network drive settings (see: Figure 8-3 on page 8-6) according to the printout.
Figure 8-15 Enter Permanent key
enter “Permanent key”
then click [Submit]