ZP3 Fire Control Panel Installation, Commissioning and Maintenance Manual
REV 11 (ISS 08/03/2010)
Page 25
Mounting auxiliary boards
The basic panel incorporates a standard range of inputs and outputs. If additional inputs or
outputs are required, a range of optional modules is available that fit into the panel. The auxiliary
I/O boards mount onto the auxiliary chassis as shown in Figure 19.
Figure 19: Mounting auxiliary boards
Legend
Item Description
Item Description
1
Position ‘A’
3
Position ‘C’
2 Position
‘B’
The maximum number of auxiliary boards that can be fitted into a ZP3 panel is three (3). This can
be all of one type, or a mix of types. This provides from 24 to 72 outputs within the ZP3 cabinet. If
additional auxiliary boards are required, these must be mounted in a separate "Remote Control
Cabinet". Various size cabinets are available, and each ZP3 panel can support up to 896 outputs,
of which 768 are freely programmable.
Auxiliary boards and modules
The following I/O auxiliary boards are available:
ZP3AB-MIP8 Input Board (8-way)– see
ZP3AB-MIP8 Input board
on page 60
ZP3AB-RL8 Relay Board (8-way)– see
ZP3AB-RL8 Relay board
on page 57
ZP3AB-MA8 Monitored Output Board (8-way) – see
ZP3AB-MA8 Monitored output board
on
page 58
ZP3AB-OP24 Transistor Output Board (24-way) – see
ZP3AB-OP24 Transistor output board
on
page 59
