ZP3 Fire Control Panel Installation, Commissioning and Maintenance Manual
REV 11 (ISS 08/03/2010)
Page 115
Maintenance
The main menu is the entry point to all of the maintenance related software functions. To access
the main menu:
1. Press the MENU key (
) on the keypad. The display shows the following (see Figure 69):
Figure 69: Main menu
2. Press <1. Maintenance> on the keypad to enter the
Maintenance Menu
. You will be requested
to enter an access code. Key-in the maintenance (level 2) access code and press
. The
following screen appears (see Figure 70).
Figure 70: Maintenance menu
The menu name is displayed on the top line, and the menu items are shown with numbers
alongside. Menu items are selected by pressing the numeric key that matches the item number.
Selecting a menu item may cause another menu to appear or may carry out a particular function.
The operator may be prompted to enter the required information via the keypad.
Any menu can be cancelled and the previous menu presented by pressing the ESC key (
). The
ESC key is used to cancel or abort the current activity and return to the previous activity.
Exit the menu system completely by pressing the HOME key (
). This returns the panel to its
normal operation display. To prevent a system from being inadvertently left in a menu, a time-out
is built into the menu system, i.e. from the last time a key was pressed. In menu selection, the
time-out is approximately 45 seconds, and if a software function has been started and not
completed, then it is 12 minutes.
