ZP3 Fire Control Panel Installation, Commissioning and Maintenance Manual
REV 11 (ISS 08/03/2010)
Page 63
Setup menu
The main menu is the entry point to all of the user operator accessible software functions. To
access the main menu:
1. Press the MENU key (
). The display shows the following (see Figure 52):
Figure 52: Main menu
2. Press <3. Setup menu> to enter the Setup Menu. You are prompted to enter the access code.
3. Enter the setup (level 3) access code and press the Enter key (
). The following screen
appears (see Figure 53).
Figure 53: Setup menu
The menu name is displayed on the top line, and the menu items are shown with numbers
alongside. Menu items are selected by pressing the numeric key that matches the item number.
Selecting a menu item may cause another menu to appear or may carry out a particular function.
The operator may be prompted to enter the required information via the keypad.
Any menu can be cancelled and the previous menu presented by pressing the ESC key. The ESC
key is used to cancel or abort the current activity and return to the previous activity.
Exit the menu system completely by pressing the HOME key. This returns the panel to its normal
operation display. To prevent a system from being inadvertently left in a menu, a time-out is built
into the menu system, i.e. from the last time a key was pressed. In menu selection, the time-out is
approximately 45 seconds, and if a software function has been started and not completed, then it
is 12 minutes
The “Normal operation display” consists of either the “Home” screen showing either a title
m time and date (if panel is in quiescent condition) OR an alarm condition.
