ZP3 Fire Control Panel Installation, Commissioning and Maintenance Manual
Page 42
REV 11 (ISS 08/03/2010)
Back-up batteries
Install the back-up batteries as follows:
1. Make sure the back-up batteries are correct as specified under ‘Batteries’ in Table 4 on page 2.
2. Position a back-up battery in the left-most mounting position in the chassis as shown in
Figure 35 below.
Figure 35: Back-up batteries mounting position
3. Locate the battery-mounting bracket (packed separately in bubble wrap in the main shipping
carton).
4. Hook the curved end of the battery mounting bracket-securing hook into the hook locator on
the hook mounting plate located on the chassis (see Figure 35 above).
5. Taking care that the securing hook is in position, install the second back-up battery in the
right-most position in the chassis.
6. Secure the batteries to the chassis with the mounting bracket using the wing nut supplied
(see Figure 36 below).
Figure 36: Securing the back-up batteries
7. Connect the back-up batteries as described under “
Battery connection
” on page 49.
