GCC Technologies S290LS Series, User Manual

Page: 141 / 148

Mirror 2
Mirror 4
Mirror 3
Mirror 2, 3, 4
These mirrors are located in the work table area of the LaserPro S290LS.
Mirror 2
1) Unscrew and remove the black dust cover covering mirror 2.
2) Loosen the thumbscrew holding mirror 2 in place.
3) Clean the lens in the proper manner.
4) Place the mirror back to the optics holder after cleaning.
5) Tighten the thumbscrew.
6) Replace and secure the black dust cover.
Mirror 3
1) Loosen the thumbscrew holding mirror 3 in place.
2) Clean the lens in the proper manner.
3) Place the mirror back to the optics holder after cleaning.
4) Tighten the thumbscrew.
Mirror 4
1) Loosen the three thumbscrews securing the laser carriage panel and remove the laser carriage
panel to reveal mirror 4 and the focal lens.
2) Loosen the top thumbscrew to remove mirror 4 (as shown in the picture below).