GCC Technologies S290LS Series, User Manual

Page: 87 / 148

232001410G(10) 83
5.2.2 Color Management
The LaserPro driver uses pen color settings to control laser engraver’s engraving and cutting
parameters. In addition to having your Page Setup and Orientation properly set in your graphics
software, you will also need to make sure Color Management is DISABLED prior to working with
the LaserPro S290LS Print Driver.
From your graphic software’s Color Management page:
• Disable Color Management or set Color Management to Off.
CorelDRAW Example (Color Management)
The following is an example of how to properly disable Color Management in the graphics
software. CorelDRAW is the designated graphics software used for this example. For other graphics
software, you will need to access the corresponding Color Management page.
1) From the primary menu, click TOOLS
ĺ
COLOR MANAGEMENT and CorelDRAW’s
Color Management will appear.
2) Under the Style pull down menu, select COLOR MANAGEMENT OFF.
3) Click OK to complete the color management adjustments.