GCC Technologies S290LS Series, User Manual

Page: 127 / 148

232001410G(10)
123
The clamps on the rotary attachment can be detached and reverted for better fitting of objects of different sizes.
Note that the clamps should be assembled by lining up the correct numbers.
Please remember to lubricate the detachable clamps along the groove with machine oil regularly after each use.
The rear end of the Rotary Chuck also can be locked or unlocked to slide its position by using an Allen key as
shown below.
Dial the lever indicated with red arrow below to move up or down the rear end which will adjust its leveling to
match clamping end. The red circle marked leveling screws can be removed and reassembled to different height
level of openings with Allen key.