GCC Technologies S290LS Series, User Manual

Page: 122 / 148

232001410G(10)
118
NOTE
Experienced users may choose to try other component setups to suit their particular
engraving / cutting techniques or working material. Feel free to explore different ways to
setup the various SmartBOX components to generate results you wish to achieve.
7.4 SmartBOX Option
The SmartBOX is an innovative combination of a cutting box, honeycomb table, and material
support stands. During the cutting and engraving process, unwanted scrap, dust, and vapor byproducts
are left behind. The cutting box collects the larger scrap byproducts while venting out the smaller dust
particles, vapors, and smoke to minimize excess buildup on the machine, worktable, and your project. The
SmartBOX allows you to maintain a clean worktable and minimizes backside burning of your media,
whether you are working with thick and firm materials or thin and flexible materials.
SmartBOX Components
a
b
• Cutting Box (a)
• Honeycomb Table (b)
• Material Support Stands (c)
• Thumb Screws(d)
c
d
It is highly recommended that you use different setups of the SmartBOX depending on the physical
properties of the material you will be working with. Here is the recommended SmartBOX
component setups based on your working material.
Component
Application
Cutting Box
Honeycomb Table/
Aluminum Grid
Cutting Table
Material Support
Stands
Thin, Flexible Materials
Required Required Not Required
Thick, Firm Materials
Required Not Required Required
.