GCC Technologies S290LS Series, User Manual

Page: 82 / 148

232001410G(10)
78
Navigating to this page:
Other Page>> Machine Setting Page
Main Work Page
press F4
Functions Page
Select<
Machine
Setting
>from the menu
Machine Setting Page
Select<
Other
>from the menu
Others Page
The Others Page allows you to change various settings that correspond to the control panel. The
Language setting will allow users to change available languages displayed on the control panel.
The Unit setting will allow you to change whether the units displayed by the control panel is in the
metric or imperial system. The EOF (end of file) Alarm setting will enable or disable an audible
notification when jobs are complete. The Air Delay setting allows you to specify the delay in
seconds of the SmartAIR air-assist after the point of laser firing.
• Language: ENGLISH (others dependent on Firmware)
• Unit: METRIC / ENGLISH
• EOF Alarm: YES / NO
• Air Delay: 1-100 seconds
Tip
Depending on the material you are engraving with, your laser settings, and the
desired results, please experiment with the air delay to achieve your desired results.
Other Page
Relevant Buttons Function
F1 (Back) Back to previous page
F4 (Save) Save your current settings
ː
/
˒
Directional Scroll through the menu selections
Y
/
Z
Directional
Adjust the value for that selection
Start / Stop Back to Main Work Page
Auto Focus Initiate the auto focus function
Ÿ
/
ź
Manual Focus Buttons Manually adjust the height of the work table (Z-axis)