GCC Technologies S290LS Series, User Manual

Page: 53 / 148

232001410G(10) 49
Once you have installed the LaserPro USB Driver (for use with USB connection), LaserPro Print
Driver, and have connected the LaserPro S290LS to your computer, you will need to familiarize
yourself with the LaserPro S290LS control panel and LaserPro Print Driver. The print driver will be
where specific laser parameters for your jobs are configured, while the control panel will allow
you to set repeat times, manipulate file order, perform auto / manual focusing, and more.
5.1 Using the Hardware
5.1.1 Laser Key Switch
Turn the key-switch to the “ON” position BEFORE powering on the machine. If the key-
switch is turned to the “OFF” position, the laser will be disabled meaning that the laser
will not fire although the XY motion system will still move.
5.1.2 Adjusting the LCD Display Screen’s Contrast Setting
Depending on the lighting of your immediate work area, you may need to adjust the contrast
of the LCD display screen. You may increase or decrease the display screen’s contrast via
the contrast adjustment wheel found on the inside of the front cover on the bottom, right-hand
side. You can access this area by opening the top window and looking inside to the rear, right
side of the work area (as shown in the picture below).
'
* This picture was taken with the SmartLID opened to clearly show the location of the
contrast adjustment wheel.
LCD Display Screen
Contrast Adjustment
Wheel