Page 16
It is essential that you drain your chiller and replace the water a minimum of every 3 months. Disconnect the pipes from both units and drain excess water
into a suitable container to reduce unit weight. To completely drain all the water from the chiller, place the unit in/over a sink and remove the draining cap
(indicated in the diagram below).
Once the water has completely drained from both the chiller and laser then you can attach the water pipes correctly to the chiller and laser cutter.
Undo the screw cap on the top of the water chiller and fill with your new de-ionised water up to the required level.
Temperature Indicator
Warning Light
Safe running light
Outlet pipe connection
On/Off power switch
H
Ho
ow
w Offtteen
n Do
o Yo
ou
u Ch
haan
ng
gee Yo
ou
urr Waatteerr??
Inlet pipe connection
Draining cap
Cooling fan
Power cable insert
CW3000 Chiller Unit (7-8 litres
)
CW5000/5200 Chiller Unit (6-7 litres)
Water Chiller Information
W
Wh
haatt Tyyp
pee o
off Watteerr Do
oeess tth
hee Ch
hiilllleerr Req
qu
uiirree??
You should only use de-ionised water in the chiller unit. This is becasue de-inoised water reduces electrical conductivity and also reduces mineral deposits
on the chillers internal components. Changing the water regularly will aid the lifetime of the water chiller. De-ionised water can be purchased from most
automotive shops such as Halfords etc.
Filling cap
