![background image](http://html1.mh-extra.com/html/gbc/explorer-107/explorer-107_operation-and-maintenance-manual_3934818092.webp)
Page 5 - 26
Explorer 107 Operation and Maintenance Manual
Operations
© GBC Pro - Tech December 1999
b) Raise the safety shield to its full up right
position.
c) Pull the two locator latches of the pressure
plate toward the center of the laminator.
Locator latches
d) Remove the pressure plate and set in a safe
place away from the laminator if not used.
Replacing the pressure plate
a) Pull the two locator latches of the pressure
plate towards the center and position so the
locator latch pins align with thier respective
holes.
b) Pull both safety latches on the front safety
shield toward the center of the laminator
and lower.
c) Align the safety latches with thier respective
interlocks and slide the safety latches
outwards.
INFORMATION
The laminator will operate only when
all safety latches are in the fully
latched position.
5.10 Feed table
The feed table is equipped with a safety latch
and an interlock. These safety devices are in place
for your protction and at no time should they be
over ridden.
D A N G E R
At no time should you attempt to over ride
any of the safety devices on the laminator.