Page 8 - 7
Maintenance
Explorer 107 Operation and Maintenance Manual
© GBC Pro - Tech December 1999
i) Replace the feed table, pressure plate and front
safety shield.
j) Press POWER to “0”.
8.3 Clean the cabinets and
covers
ELECTRICAL
S H O C K
Remove power from the laminator before
cleaning. You can be severely shocked,
killed or cause a fire.
a) Use a damp cotton terry cloth ( water only ),
clean the exterior of the laminator.
b) If water is not strong enough, you may use a
mild dishwashing detergent with water and a
cotton terry cloth.
ELECTRICAL
S H O C K
Do not use liquid or aerosol cleaners on the
laminator. Do not spill liquid of any kind on
the laminator. You can be severely shocked,
killed or cause a fire. Use only a damp cloth
for cleaning unless other wise specified.
8.4 Cleaning the control
panels
ELECTRICAL
S H O C K
Remove power from the laminator before
cleaning. You can be severely shocked,
killed or cause a fire.
a) Use only a slightly damp ( water only ) non
abrasive cloth.
ELECTRICAL
S H O C K
Do not use liquid or aerosol cleaners on the
laminator. Do not spill liquid of any kind on
the laminator. You can be severely shocked,
killed or cause a fire. Use only a damp cloth
for cleaning unless other wise specified.
