Page 6 - 4
Applications
© GBC Pro - Tech December1999
Explorer 107 Operation and Maintenance Manual
b) Pull the upper unwind shaft out from the upper
film brake adjustment .
Film brake adjustment
c) Loosen the thumb screw to the two film core
end supports.
T h u m b s c r e w
d) Slide the Right core end support off of the
unwind shaft.
Right core
end support
e) Ensure the core gripper support is properly
positioned for the type of film being used
and is centered on the unwind shaft.
Unwind rotation for Poly-Out films
Direction of gripper tabs
INFORMATION
Refer to Figure 6.1.1 under Section 6
Applications for unwind direction for
Poly-In and Poly-Out films
INFORMATION
The gripper tabs should point in the
opposite direction of film rotation.
W A R N I N G
Extreme caution should always be exercised
working around the core gripper support,
the grippers tabs can cut you!
