![background image](http://html1.mh-extra.com/html/gbc/explorer-107/explorer-107_operation-and-maintenance-manual_3934818017.webp)
Page 1 - 3
Safety
Explorer 107 Operation and Maintenance Manual
© GBC Pro - Tech December 1999
The laminator is equipped with two
EMERGENCY STOPS ( E-STOP ).One is located
above the TEMPERATURE CONTROL panel and
the second is located above machine POWER. Refer to
Figure 1.2.2
Figure 1.2.2 Emergency stops
A
R
ON
RO
E m e r g e n c y s t o p s
To engage the EMERGENCY STOP feature,
press down. Either of these, when engaged, removes
power to the motor.
Push down
To continue operation, both E-STOPS must be
in the up position. To reset the E-STOP, twist the button
1/4 turn clockwise.
Rotate
INFORMATION
The laminator will operate only when
all safety latches are in the fully
latched position.
1.3 Installation
The following symbols are positioned at various
points in Section 4 Installation.
CAUTION
Failure to follow the pre-installation check
list can result in damage to the laminator.