Page 5 - 7
Explorer 107 Operation and Maintenance Manual
Operations
© GBC Pro - Tech December 1999
C O L D
: When pressed, sets the cold default set point
for the corresponding heaters. ( All heaters have a
default value of 32
o
F ( 0
o
C ) for Cold )
H O T
M E A S
C O L D
: Pressed once, increases the set point
temperature for the corresponding heater by one
increment. When pressed and held, automatically
increases the set point value by single increments.
H O T
M E A S
C O L D
INFORMATION
"Beeps" once for every one
increment of change.
: Pressed once, decreases the set point
temperature for the corresponding heater by one
increment. When pressed and held, automatically
decreases the set point value by single increments.
H O T
M E A S
C O L D
INFORMATION
"Beeps" once for every one
increment of change.
Refer to Figure 5.1.2 for a complete illustration of
the Temperature Control Panel.