Page 4 - 6
Installation
Explorer 107 Operation and Maintenance Manual
© GBC Pro - Tech December 1999
Moving the laminator
a) Have the laminator lifted off the skid and
placed on the floor by licensed riggers.
W A R N I N G
Do not attempt to move the laminator across
anything other than a flat level surface
without trained and qualified riggers. You
can be crushed or seriously injured.
W A R N I N G
The Explorer 107 Laminator is a large and
heavy piece of equipment. It is necessary to
e m p l o y L I C E N S E D R I G G E R S O N L Y t o
move the laminator. The laminator is not
designed to be tipped up or sideways in any
way. Such action disturbs the exact
alignment of the rolling parts of the machine
and requires extensive realignment. You can
be crushed or seriously injured.
GBC Pro-Tech's warranty does not cover
malfunction of the equipment due to
mishandling and / or tipping. GBC Pro-
Tech bears no responsibility for personal
injury or damage due to moving the
laminator improperly.
INFORMATION
b) Remove any plastic strapping and/or packing
paper taped to the machine.
CAUTION
Do not use a knife or other sharp object to
remove the shrink wrap from around the
laminator. You can cause irreparable
damage to the rollers.
c) Move all packing materials to a safe distance
from the laminator and dispose of properly.
d) Use two people to carefully roll the laminator to
the desired location.
About recycling: The crate components can
be reused for shipping the laminator again
or can be disassembled and the wood and
screws recycled. The shrink wrap is not
recyclable, so it must be discarded.
INFORMATION
e) Use Figure 4.1.1 for the suggested floor
layout.