Page 1 - 9
Safety
Explorer 107 Operation and Maintenance Manual
© GBC Pro - Tech December 1999
INFORMATION
When the laminator is first turned on, the
control panels display the default settings.
Default setting; Cooling Fan = Off, Motor
Speed = Off, Top Teflon Roller = 32
o
F, Nip
Rollers = 32
o
F, Bottom Teflon Roller = 32
o
F and Sub Heaters = 32
o
F.
INFORMATION
The unit of measurement can be set to
display
o
F or
o
C.
INFORMATION
It is recommended that you press HOT
( ) first, then adjust for desired
temperature setting.
H O T
INFORMATION
"Beeps" once for every one
increment of change.
INFORMATION
"Beeps" once for every one
increment of change.
W A R N I N G
At these temperatures there is a danger of
severe burn if the rollers are touched during
set up, operation or servicing.
INFORMATION
W h e n a n E M E R G E N C Y S T O P i s e n g a g e d ,
all motion stops. The nip will not change
from the operating setting.
INFORMATION
The Temperature control panel settings
are not affected when an E-STOP
has been pushed.
INFORMATION
Power to the motor is removed when
the safety shield is not in the fully
locked position.
