Page 1 - 14
Safety
Explorer 107 Operation and Maintenance Manual
© GBC Pro - Tech December 1999
CAUTION
Never leave the rollers in the down position
without rolling. Prolonged contact in one
area can form flat spots on the rollers.
W A R N I N G
The following steps are performed while
the laminator is HOT! Avoid contact
with the heating components!
INFORMATION
Refer to Figure 6.1.1 under Section 6
Applications for unwind direction for
Poly-In and Poly-Out films
INFORMATION
The gripper tabs should point in the
opposite direction of film rotation.
W A R N I N G
Extreme caution should always be exercised
working around the core gripper support,
the grippers tabs can cut you!
Ensure the roll of laminate is loaded
properly on the unwind shaft.
Exposed adhesive should be facing
away from the heated components.
This will prevent hours of cleaning!
CAUTION
INFORMATION
For 2-1/4 core film, turning the roll film in
the same direction as the gripper tabs while
sliding makes loading the film onto
the unwind shaft easier.
W A R N I N G
Always use safe and proper lifting practices
when lifting heavy objects. You can become
seriously injured or crushed.
