![background image](http://html1.mh-extra.com/html/gbc/explorer-107/explorer-107_operation-and-maintenance-manual_3934818077.webp)
Page 5 - 11
Explorer 107 Operation and Maintenance Manual
Operations
© GBC Pro - Tech December 1999
5.3.1 Power
a) Clear the area around the laminating rollers
and pull rollers.
b) Ensure that the laminator is plugged in and
no E-STOP is depressed.
c) Press POWER to the “I ” position to turn on
the laminator.
!
R O L L L A M I N A O R
Model Explo er 1
nput o tage 22
/ 6 Hz
nput cu rent 2 A
ower cun upt on 5 8
W
empe atu e ange Up
6
C
Cu rent at ng of ir uit b eaker 3 A
Max lam nat ng w dth 1
5 mm
Se ial No ### ###### ##
M a d e i n K o r e a / a b i q u e E n C o e e
S
T
O
P
E
M
E
R
G
E N C Y
Power
d) Press POWER to “O” position to turn off the
laminator.
5.3.2 Film loading
The Explorer 107 can accommodate Poly-In
or Poly-Out films. Each film requires a different loading
procedure. Refer to Section 6 Applications for
webbing methods. With regards to webbing methods,
both require the adhesive side of the film to face away
from the heating components.
W A R N I N G
Extreme caution should always be exercised
when removing an unwind shaft, the
gripper tabs can cut you!
a) Lift the upper unwind shaft from the lateral
film adjustment side out of its support
saddle.
Lateral film adjustment