Page 1 - 12
Safety
Explorer 107 Operation and Maintenance Manual
© GBC Pro - Tech December 1999
Excessive brake tension may cause the
output to curl. Always use the minimum
brake tension required to complete the task.
INFORMATION
At no time should the slitter guard be
removed! Sharp blades can cut you!
W A R N I N G
CAUTION
Do not webb the laminator with inline
slitters in the down position! The leader
board can damage the blades.
INFORMATION
The large inner dials on the left and
right cabinet doors will lower and
raise both, the left and right, sliiters.
INFORMATION
The center slitter can not be lowered
without lowering the side slitters.
INFORMATION
The side slitters can not be raised without
raising the center slitter.
Caution should always be exercised when
using the rear cut-off blade.
Sharp blade can cut you!
W A R N I N G
Stop the laminator before using the rear
cut-off blade. Moving material can
damage the rear cut-off blade!
CAUTION