Style 260C / Style 340C
Laminator with Trimmer
Operating Instructions
Style
260C
Style
340C
Technical Data
3.Changing the cutting head
When the blades in the cutting head are damaged or worn, the
cutting head must be replaced.
Note: Only the entire cutting head can be replaced.
3.1 Remove the end cap of the guide rail from the base plate by
pushing it upwards at the lower end at the same time as pushing
it inwards gently.
3.2 Replace the old cutting head with a new one.
3.3 Slide the guide rail back in the device in the base plate and install the new cutting head in the
process
3.4 Place the end cap from above on to the opening at the end of the guide rail.
