Page 1 - 10
Safety
Explorer 107 Operation and Maintenance Manual
© GBC Pro - Tech December 1999
W A R N I N G
Extreme caution should always be exercised
when removing an unwind shaft, the
grippers tabs can cut you!
INFORMATION
Refer to Figure 6.1.1 under Section 6
Applications for unwind direction for
Poly-In and Poly-Out films
INFORMATION
The gripper tabs should point in the
opposite direction of film rotation.
Ensure the roll of laminate is loaded
properly on the unwind shaft.
Exposed adhesive should be facing
away from the rollers.
This will prevent hours of roll cleaning!
CAUTION
INFORMATION
For 2-1/4 core film, turning the roll film in
the same direction as the gripper tabs while
sliding makes loading the film onto
the unwind shaft easier.
W A R N I N G
Always use safe and proper lifting practices
when lifting heavy objects. You can become
seriously injured or crushed.
INFORMATION
Ensure the roll pins are on top. They should
not be in the saddle!
INFORMATION
Use Chart 5.3.1 Film centering chart in
Section 5 Operations for measurements.
