Page 7 - 5
Troubleshooting
Explorer 107 Operation and Maintenance Manual
© GBC Pro - Tech December 1999
7.3 Machine problems
Once the Hints are all checked, and your problem
still exists, a service call must be placed for a qualified
Technician to fix the problem.
You may do this by dialing 1 ( 800 ) 790 - 7787.
This will connect you with GBC National Service dispatch.
You will be required to give the serial number of your
machine when placing a service call.
The space below has been provided to keep this
number readily available if and when needed.
My Explorer 107 Laminator serial number
is :
At no time does GBC Pro-Tech suggest or
recommend that you attempt to fix the machine by opening
the cabinets yourself.
W A R N I N G
Do not wear ties, loose fitting clothes or
dangling jewelry while operating or
servicing the laminator. These items can get
caught in the nip and choke you or you can
be crushed or burned.
7.3.1 Problem/Hints
Problem : No illumination to the control panels.
Hints : • Confirm that POWER is on the “ I ”
position.
• Ensure that the plug is fully seated in the
receptacle.
Problem : Press
O N
under Motor Speed,
rollers will not turn..
1
2
3
4
5
6
7
8
9
10
M O T O R S P E E D
O N
O F F
R E V E R S E
Hints: • Ensure that no E-STOP is depressed.
• Ensure that the feed table safety latches are
in the fully locked position.
• Ensure the safety shield lataches are in the
fully locked position..
