190-01007-C1
GTN Xi Part 23 AML STC Maintenance Manual
Rev. 1
Page 7-3
Replacing GMA 35
Refer to Section 7.2.1 for configuration steps.
GMA 35
Perform checkout procedures per Section 7.2.2.
Ensure that the GMA 35 software is the specified version
on
Equipment List GTN Xi Part 23 AML STC
(P/N 005-
00533-L1).
Replacing GMA 35c
Refer to Section 7.2.1 for configuration steps.
GMA 35c
Perform checkout procedures per Section 7.2.2.
Perform the Connector Engagement Check in Section
7.1.2.1.
Ensure that the GMA 35c software is the specified version
on
Equipment List GTN Xi Part 23 AML STC
(P/N 005-
00533-L1).
Replacing a serial
tuned DME
Perform interface check per Section 7.3.2.2 (Interface
Check).
GTN 650Xi/750Xi
Replacing a display
Perform the appropriate interface check per Section 7.3.3
(Displays).
GTN Xi
Replacing a
transponder
Configure remote transponder per
Section 7.3.4.1 (Remote Transponder Configuration).
GTN Xi
Perform interface check per Section 7.3.2.2 (Interface
Check).
Replacing altitude
encoders, air data
computers, or fuel-
air data computers
No action required.
GTN Xi
Replacing traffic
system or weather
system
Perform the appropriate interface check per Section 7.3.5. GTN Xi
Replacing weather
radar
Perform the appropriate interface check per Section 7.3.6. GTN 725Xi/750Xi
Replacing fan
Perform the Fan Interface Check per Section 7.3.8.
GTN Xi
Replacing a
Flight Stream 210
No configuration/interface checkout procedures are
required to return to service.
Flight Stream 210
Replacing a
Flight Stream 510
Update databases as necessary, as described in
Flight Stream 510
Modification
Required Action
Affected Models
