Garmin GTN Xi Series, Maintenance Manual

Page: 149 / 163

Equipment Interfaced to the GTN X
i
The purpose of the GTN
Xi
Interfaced Equipment Lists (GTN
Xi
#1 and GTN
Xi
#2 (if applicable)) is to document the
equipment that is interfaced to the GTN
Xi
. Use the following guidance when filling out these tables:

Installed? : Check “Yes” if the equipment is installed in the aircraft and interfaced to the GTN
Xi
. If the
equipment is not installed in the aircraft, check “No.” If the equipment is installed in the aircraft but not
interfaced to the GTN
Xi
, check “No.”

Model(s) : Enter the model number or numbers of the equipment that is interfaced to the GTN
Xi
.

Interface(s) : Enter the type of interface used to connect to the GTN
Xi
.

GTN Port Numbers : When applicable, enter the GTN
Xi
port number or numbers used for the interface. This
column is generally applicable only to serial ports such as RS-232 and ARINC 429.

Covered by GTN
Xi Part 23 AML
STC Installation Manual? :
Refer to
Section 3. Check “Yes” if the
equipment is listed in Appendix C of
GTN Xi Part 23 AML STC Installation Manual
. Check “No” if the
equipment is not listed in Appendix C of
GTN Xi Part 23 AML STC Installation Manual
.
NOTE
This information is optional and is not required to be completed or maintained with the aircraft
records
.
190-01007-
C
1
Rev. 1
GTN Xi Part 23 AML STC Maintenance Manual
Page A- 24