190-01007-C1
GTN Xi Part 23 AML STC Maintenance Manual
Rev. 1
Page 6-10
6.4 Flight Stream 210
Refer to Figure 6-5 when performing the following steps:
Removal
1. Locate and open the BT Link circuit breaker.
2. Unscrew the two jackscrews on the Flight Stream 210 connector and remove it.
3. Locate the four #6 mounting screws for the Flight Stream 210 and unscrew them.
4. Remove the unit.
Re-installation
1. Ensure that the BT Link circuit breaker is open.
NOTE
Ensure that the Flight Stream 210 is mounted with the arrow pointing in the direction of
flight.
2. Re-install the Flight Stream 210 using the four previously removed #6 mounting screws. Tighten
fasteners until snug and turn an additional one-quarter turn.
3. Attach the connector, tightening the two jackscrews.
4. Close the BT Link circuit breaker.
Figure 6-5 Flight Stream 210 Assembly Overview
(Bonding Strap Not Shown)
DIRECTION OF FLIGHT
FLIGHT STREAM 210: P/N 011-03257-40
CONNECTOR KIT ASSEMBLY: P/N 011-03258-00
