Garmin GNS 430AW, Pilot'S Manual & Reference

Page: 74 / 214

3 - DIRECT-TO
64
Shortcuts
Shortcuts are available when using the direct-to
key, allowing you to bypass the use of the small and
large right knobs to enter the destination waypoint’s
identifier. A direct-to can be performed from any page
displaying a single waypoint identifier (such as the
WPT pages for airports and navaids) by simply press-
ing
direct-to and ENT . For pages that display a list
of waypoints (e.g., the nearest airport page) , you must
highlight the desired waypoint with the cursor before
pressing the
direct-to key.
To select an on-screen waypoint (other than the
map page) as a direct-to destination:
1. If a single airport, navaid or user waypoint is
displayed on-screen: press direct-to , then
press ENT twice.
2. If a list of waypoints is displayed on-screen:
press the small right knob to activate the
cursor, turn the large right knob to highlight
the desired waypoint, then press direct-to
followed by
ENT
twice.
Direct-to destinations may also be selected from
the map page , by panning to the desired destination
location and pressing direct-to and ENT (twice).
If no airport, navaid or user waypoint exists at the
desired location, a waypoint named “+MAP” will
automatically be created at the location of the pan-
ning pointer.
To select a direct-to destination from the map
page:
1. From the map page, press the small right
knob to display a panning pointer.
2. Turn the
small
and
large right
knobs to place
the panning pointer at the desired destination
location.
3. If the panning pointer is placed on an existing
airport, navaid or user waypoint, the waypoint
name will be highlighted. Press
direct-to and
then ENT twice to navigate to the waypoint.
4. If the panning pointer is placed on an open
location, press
direct-to
and
ENT
twice to
create a “MAP” waypoint and navigate to it.
Direct-to Shortcuts