5 - PROCEDURES
90
Approach with Hold
DO NOT USE FOR
NAVIGATION
Farmville (VA) Regional
GPS Rwy 21
3. Press
ENT
twice.
This time, you select the GPS runway 21 approach
into Farmville Regional. The GPS runway 21 approach
begins with a holding pattern at the IAF, BODRY
intersection.
4. Press
PROC
and select the “GPS 21”
approach.
5. From the transitions window, select BODRY
intersection as the IAF. Also, select “Activate?”
to load and activate the approach.
6. Once you activate the approach, the active
flight plan page will appear. You may review
the approach sequence by pressing the
small
right
knob and turning the
large right
knob.
Press
FPL
to return to the navigation pages.
7. As in the last example, within 31 nautical miles
of the airport, the 400W-series unit will switch
from en route mode to terminal mode, and the
CDI scale will transition from 2.0 to 1.0 nautical
miles, full scale deflection.
NOTE:
Upon activating an RNAV GPS approach,
you are given the option to skip any non-required
holding patterns during the initial transitions of
the approach. In a GPS approach, you will not be
given the option and you must manually reselect
waypoint sequencing.
8. Just prior to crossing BODRY intersection, an
alert—”HOLD TEARDROP”—will appear in
the lower right corner of the screen to sug-
gest the proper holding pattern entry. (“HOLD
DIRECT” or “HOLD PARALLEL” may be offered
on other similar approaches.)
Summary of Contents for GNS 430AW
