Garmin GNS 430AW, Pilot'S Manual & Reference

Page: 106 / 214

5 - PROCEDURES
96
Vectors-To-Final Approach
Vectors to Final
Let’s take a second look at the “VOR 22” approach
into Billard Municipal. Instead of following the DME
arc, ATC tells you to expect vectors onto the final
approach course. There are several ways to select “vec-
tors to final” with the 400W-series unit. The first two
options below will normally require the least workload
to accomplish:
• When the approach is first selected, choose “VEC-
TORS” from the transitions window.
• Load a full approach — including the IAF from
the transitions window. When cleared, press
PROC and select “Activate Vectors-To-Final?”.
• Load the full approach. Use the direct-to key (by
pressing it twice) from the active flight plan page
to select the desired leg of the approach.
To select “VECTORS” from the transitions window:
1. Select Billard Municipal (KTOP) as your desti-
nation, using the
direct-to
key, or as the last
waypoint in a flight plan.
2. Press the PROC key and select the “VOR 22”
approach.
3. From the transitions window, select “VEC-
TORS”.
4. Select “Load?” (or “Activate?”, if already on
vectors-to-final).
To activate vectors-to-final from the procedures
page:
1. Select Billard Municipal (KTOP) as your desti-
nation, using the direct-to key or as the last
waypoint in a flight plan.
2. Press the
PROC
key and select the “VOR 22”
approach.
3. From the transitions window, select “LEBVY”
as the IAF. Also, select “Load?”.
4. When cleared, press the
PROC
key and select
“Activate Vector-To-Final?”.