manualshive.com logo in svg

Garmin GNS 430AW, Pilot'S Manual & Reference

The Garmin GNS 430AW is a versatile avionics navigation system designed for pilots. Ensure optimal performance with the Pilot's manual & reference, available for free download on our website. Access this essential manual to enhance your flying experience. Visit manualshive.com to download your copy today.

Share
Download
background image

5 - PROCEDURES

98

Course-From-Fix Legs

6.   As the CDI needle centers, make any remain-

ing course corrections to establish yourself on 
the  final  approach  course. Vectors-To-Final 
activates the approach immediately and gives 
a 2° angular full scale deflection all the way 
to and beyond the FAF (up to 1 NM full-scale 
deflection). 

DO NOT USE FOR 

 NAVIGATION

7.   As  you  approach  the  FAF,  a  waypoint  alert 

in the lower right corner (“RT TO 214° x S”) 
will  appear.  Make  any  course  adjustments 
necessary for the final course segment (FAF to 
MAP). 

8.   As you cross the FAF, the destination sequences 

to  the  MAP  (“RW22”). With  the  needle 
centered, fly toward the MAP, observing the 
altitude minimums dictated by the approach 
plate. CDI scaling continues to tighten to 350 

feet, full-scale deflection. 

9.  As you approach the MAP, a waypoint alert 

(“ARRIVE WPT”)  appears  in  the  lower  right 

corner. 

10.   As  you  cross  the  MAP,  “SUSP”  appears 

above the 

OBS

 key, indicating that automatic 

sequencing  of  approach  waypoints  is  sus-

pended  at  the  MAP. A “from”  indication  is 

displayed on the CDI and Default NAV Page, 

but course guidance along the final approach 

course continues. Do NOT follow this extended 

course.  Follow  published  missed  approach 

procedures using the 

OBS

 key to initiate the 

missed approach sequence. 

Course From Fix Flight Plan Legs

Certain approach, departure, and arrival procedures 

in the Jeppesen database contain 

course from fix

 flight 

plan legs. The 400W-series is able to load these legs 
into the flight plan along with the rest of the procedure 
data, and to provide navigation along these legs. 

There are three different types of course from fix legs: 

TYPE 1: Course from fix to distance, or Course 
from fix to DME distance

Course from fix to distance

 legs will appear in the 

flight plan like normal waypoints, but the destination 
name will always begin with a “D”, followed by a dis-
tance in tenths of nautical miles from the waypoint fix. 
This example uses the VOR/DME RWY 25 approach 
into Palmdale, California (KPMD) and includes a 
teardrop course reversal. 

Summary of Contents for GNS 430AW























































































































































































































Reviews:

No comments

Related manuals for GNS 430AW

Garmin nuvi 205W Series Quick Start Manual preview
nuvi 205W Series
Brand: Garmin Pages: 19
Garmin nuvi 1690 Safety And Product Information preview
nuvi 1690
Brand: Garmin Pages: 36
Garmin GPSMAP 2006 Owner'S Manual & Reference preview
GPSMAP 2006
Brand: Garmin Pages: 104
Garmin GPSMAP 2006 Installation Manual preview
GPSMAP 2006
Brand: Garmin Pages: 8
Garmin Montana 650 Operation preview
Montana 650
Brand: Garmin Pages: 5
Garmin Montana 600 Quick Start Manual preview
Montana 600
Brand: Garmin Pages: 12
Garmin Mobile 10 Quick Start Manual preview
Mobile 10
Brand: Garmin Pages: 20
Garmin GPSMAP 431 Important Safety Information preview
GPSMAP 431
Brand: Garmin Pages: 4
Garmin Apollo GX50 User Manual preview
Apollo GX50
Brand: Garmin Pages: 336
SkyGolf skycaddie sw2 User Manual preview
skycaddie sw2
Brand: SkyGolf Pages: 16
Vjoy Car Tracking Smart ET005 User Manual preview
Tracking Smart ET005
Brand: Vjoy Car Pages: 14
YF Atlas4 User Manual preview
Atlas4
Brand: YF Pages: 18
Garmin nuvi 5000 Safety And Product Information preview
nuvi 5000
Brand: Garmin Pages: 4
Garmin Zumo TM 500/550 Owner'S Manual preview
Zumo TM 500/550
Brand: Garmin Pages: 74
Epson WristableGPS SS-300 User Manual preview
WristableGPS SS-300
Brand: Epson Pages: 142
Epson SS-500R User Manual preview
SS-500R
Brand: Epson Pages: 144
Epson SS-300B User Manual preview
SS-300B
Brand: Epson Pages: 142
Garmin BMW Motorrad Navigator III Owner'S Manual preview
BMW Motorrad Navigator III
Brand: Garmin Pages: 50

Brands by name

Popular brands

Load more brands