manualshive.com logo in svg

Garmin GNS 430AW, Pilot'S Manual & Reference

The Garmin GNS 430AW is a versatile avionics navigation system designed for pilots. Ensure optimal performance with the Pilot's manual & reference, available for free download on our website. Access this essential manual to enhance your flying experience. Visit manualshive.com to download your copy today.

Share
Download
background image

15

TAKEOFF TOUR

NavCom Page

From the 

default NAV page

, simply turn the 

small 

right 

knob to display the 

map page

 and again to dis-

play the 

NAVCOM page

. The 

NAVCOM page

 displays 

the available frequencies (communications and naviga-
tion) for the departure airport, any en route airports 
that are included in your flight plan, and the final 
destination airport. When using the direct-to function, 
frequencies will be listed for the airport nearest to your 
starting position and the destination airport. 

A frequency listed on the 

NAVCOM page

 can be 

quickly transferred to the standby field of the COM 
or VLOC windows. This time-saving process prevents 
having to “re-key” a frequency already displayed else-
where on the screen. 

To display the frequency list for the active flight 
plan or direct-to airport: 

1.   In the Nav function, turn the 

small right 

knob 

to reach the NAVCOM page. 

2.   Push  the 

small  right 

knob  to  activate  the 

cursor  on  the  airport  identifier  field  (in  the 
GPS window). Turn the 

small right 

knob to 

display the list of airports (departure, arrival 
and en route) for your flight plan or direct-to. 
Continue to turn the 

small right 

knob until 

the desired airport is selected. 

3.   Press 

ENT

 to display the frequency list for the 

selected airport. 

Press ENT to show the frequencies for the 

selected airport. 

To select a communication or navigation fre-
quency: 

1.   On the NAVCOM page, push the 

small right 

knob  to  activate  the  cursor  in  the  GPS win-
dow. 

2.   Turn the 

large right 

knob to select the desired 

frequency from the list. 

Selecting a frequency on the NAVCOM page. 

3.   Press 

ENT

 to transfer the selected frequency to 

the standby field in the COM or VLOC window. 
COM frequencies will automatically go to the 
standby field of the COM window and navigation 
frequencies will automatically go to the standby 
field of the VLOC window, regardless of which 
window is currently highlighted by the cursor. 

4.   To activate the selected frequency, press the 

COM flip-flop

 (or 

VLOC flip-flop

) key. 

Swap the standby COM frequency into the 

active Com frequency location. 

NAVCOM Page

Summary of Contents for GNS 430AW























































































































































































































Reviews:

No comments

Related manuals for GNS 430AW

Simrad NSX Installation Manual preview
NSX
Brand: Simrad Pages: 32
Q-DIS Q-ROI X Quick User Manual preview
Q-ROI X
Brand: Q-DIS Pages: 6
Garmin Zumo 200 Series Owner'S Manual preview
Zumo 200 Series
Brand: Garmin Pages: 58
Garmin zumo 350LM Owner'S Manual preview
zumo 350LM
Brand: Garmin Pages: 24
Garmin ZUMO 500/550 Brukermanual preview
ZUMO 500/550
Brand: Garmin Pages: 74
Garmin VIB 10 User Manual preview
VIB 10
Brand: Garmin Pages: 2
Tektronix 070-8044-06 Service Manual preview
070-8044-06
Brand: Tektronix Pages: 482
Kingwo MT13 User Manual preview
MT13
Brand: Kingwo Pages: 17
Kingwo LT03 User Manual preview
LT03
Brand: Kingwo Pages: 18
Qstarz BT-Q818 Quick Installation Manual preview
BT-Q818
Brand: Qstarz Pages: 2
Qstarz CR-Q1100P Quick Start Manual preview
CR-Q1100P
Brand: Qstarz Pages: 4
Qstarz BT-Q1200 Super 99 Quick Installation Manual preview
BT-Q1200 Super 99
Brand: Qstarz Pages: 7
Qstarz BT-Q800 User Manual preview
BT-Q800
Brand: Qstarz Pages: 20
Qstarz BT-Q890 User Manual preview
BT-Q890
Brand: Qstarz Pages: 24
Qstarz BT-Q1000XT User Manual preview
BT-Q1000XT
Brand: Qstarz Pages: 36
Qstarz BT-Q1000X User Manual preview
BT-Q1000X
Brand: Qstarz Pages: 42
Qstarz BT-Q1000eX User Manual preview
BT-Q1000eX
Brand: Qstarz Pages: 43
Qstarz BT-Q1000XT Quick Installation Manual preview
BT-Q1000XT
Brand: Qstarz Pages: 81

Brands by name

Popular brands

Load more brands